Cesa 7 II wood-burning stove

1.799,00

Includes 19% Mehrwertsteuer
Delivery Time: Available to order

The powerful Cesa 7 II creates a homely atmosphere with its soapstone cladding and large window. This is underlined by the fact that it is equipped with a practical hotplate. The Cesa can be connected either at the top (see illustration) or directly at the rear without a visible stove pipe. The stepless air control is concealed behind the lower door.
The Cesa is also available in a smaller version with 5 kW
A+
Product data sheet

.

Variants of this model



Technical data


Heat output 6.5 kW
Height / width / depth 99.1 / 59.3 / 47.3 cm
Pipe socket Ø 150 mm
Design 1
Weight 117 kg
Exhaust gas mass flow 6.5 g/s
Average exhaust gas temperature 237 °C
Minimum delivery pressure for NWL 0.12 mbar
Multiple door locking Yes
Connection top / rear
Fresh air connection Yes
Energy efficiency A+
Complies with 2nd stage BImSchV Yes
Windshield cleaning system Yes
Fuels Wood / wood briquette
Log length 33 cm
Manufacturer Art. No. 250014

Product Safety Regulation
Economic operator Name: Feuer & Flamme GmbH
Address: Am Redder 1, 24558 Henstedt Ulzburg, DE
E-mail: info@feuer-flamme.de




Technical drawing of the Cesa 7 stove showing the front and side view with dimensions. Cylindrical shape, large viewing window.




Selecting the right stovepipes

Select the right stove pipes for your installation situation here.
If the stove is located in a corner, select a 45° angle in addition to the complete stovepipe system.

Selection of the floor protection panel

If you have a temperature-sensitive floor covering, you will need a floor protection plate.

External supply air connection

If your house is well insulated, you will need both a connection piece for external fresh air supply and the appropriate hose connection.

Window contact switch

If there is an extractor hood in an adjacent kitchen that draws air outwards, you also need a window contact switch. If your extractor hood works on a recirculation basis, this is not required.