Tea stove
This attractive stove, finished in a special white lacquer, meets the very highest standards of technology and design: a high curved pane covering almost the entire width of the stove provides a generous view of the flames. The impressive silhouette of the stove offers simple, timeless elegance.
As a stove of the latest generation, the Tea features convection air for rapid room heating in addition to hot air purging and infinitely variable adjustment.
Concealed controls, additional storage stones that can be integrated and the bar handle that runs across the entire height of the door round off the concept of this stove perfectly.
Panoramic window
The large 45 cm high panoramic window remains soot-free for a long time thanks to the high-temperature window cleaning system.
Bar handle
The high bar handle is user-friendly and stays cool even after a long burning time.
Memory block
A 70 kg storage block can be used in the upper area to store the heat.
| Heat output |
6 kW |
| Height / width / depth |
137.8/46.5/46.5 cm |
| Pipe socket Dm. |
150 mm |
| Design |
1 |
| Weight |
130 kg |
| Exhaust gas mass flow |
7.0 g/s |
| average exhaust gas temp. |
217 °C |
| Minimum delivery pressure for NWL |
0.12 mbar |
| Particulate matter |
25 mg |
| Connection |
top / rear |
| Fresh air connection |
Yes |
| Energy efficiency |
A |
| fulfills 2nd stage BimschV |
Yes |
| Windshield cleaning system |
Yes |
| Fuels |
Wood, wood briquettes and lignite |
| Log length |
33 cm |
| Manufacturer Art. No. |
130018 |
Product Safety Regulation
Economic operator Name: Feuer & Flamme GmbH
Address: Am Redder 1, 24558 Henstedt Ulzburg, DE
E-mail: info@feuer-flamme.de
Technical data
| Heat output |
6 kW |
| Height / width / depth |
137.8/46.5/46.5 cm |
| Pipe socket Dm. |
150 mm |
| Design |
1 |
| Weight |
130 kg |
| Exhaust gas mass flow |
7.0 g/s |
| average exhaust gas temp. |
217 °C |
| Minimum delivery pressure for NWL |
0.12 mbar |
| Particulate matter |
25 mg |
| Connection |
top / rear |
| Fresh air connection |
Yes |
| Energy efficiency |
A |
| fulfills 2nd stage BimschV |
Yes |
| Windshield cleaning system |
Yes |
| Fuels |
Wood, wood briquettes and lignite |
| Log length |
33 cm |
| Manufacturer Art. No. |
130018 |
Product Safety Regulation
Economic operator Name: Feuer & Flamme GmbH
Address: Am Redder 1, 24558 Henstedt Ulzburg, DE
E-mail: info@feuer-flamme.de
Model-specific accessories
An additional 40 kg storage block can be ordered for this model.
Filou XL storage block -Tea
€499,00
Selecting the right stovepipes
Select the right stove pipes for your installation situation here.
If the stove is located in a corner, select a 45° angle in addition to the complete stovepipe system.
Stove pipe set black 150mm
€139,00
Stove pipe 25 cm black 150mm
€24,00
Stove pipe 50 cm black 150mm
€29,00
Stove pipe 100 cm black 150mm
€46,00
Selection of the floor protection panel
If you have a temperature-sensitive floor covering, you will need a floor protection plate.
Semicircular glass top 120
€99,00
Semicircular glass top 130
€119,00
Glass plate rectangular 130
€119,00
Half-round steel plate 120
€179,00
Semicircular steel plate 130
€199,00
External supply air connection
If your house is well insulated, you will need both a connection piece for external fresh air supply and the appropriate hose connection.
Supply air spigot ext. fresh air
€29,00
Window contact switch
If there is an extractor hood in an adjacent kitchen that draws air outwards, you also need a window contact switch. If your extractor hood works on a recirculation basis, this is not required.
Before making a purchase, you should always consult your local district chimney sweep to find out whether the stove you have chosen is suitable for your chimney and your installation situation.
We recommend downloading the device data sheet and keeping it to hand for the preliminary discussion.
If you have any further questions about the product or installation, please do not hesitate to contact us by telephone or visit us in our studios.
Under the following link you will find your responsible district chimney sweep and further information:
As soon as your desired stove and the selected accessories are ready for dispatch, you will be informed by us.
The forwarding agent commissioned by us will then arrange a delivery date with you. Delivery is free kerbside.
Connection service
Price and performance of the package deal:
The stove connection flat rate with core drilling from 449 € incl. 19% VAT (depending on the type of chimney) applies only to transportable, free-standing stoves (no gas, oil or water-bearing stoves, no kits, pellet stoves only on request). Cash payment to the fitter on completion.
The following work is included in the connection fee:
- One journey (North Sea islands on request)
- Core drilling on the chimney up to a drilling depth of 25 cm (no concrete, no metal, no timber frame construction), from the 26th cm surcharge per cm € 2,-- incl. 19% VAT .
- Setting the DWF or socket (with our special mortar)
- Place the oven on a glass plate or tray if necessary
- Pipes are adjusted if necessary
- Connecting the stove to the existing chimney
- Test firing
- Please check in advance whether cables or pipes are laid in the area of the drill hole
If you have any questions about the product or your order process, you can reach us Mon - Fri 10 am - 7 pm on 040 - 58 50 07.
Your Feuer & Flamme Team
